Audio Mastering — Loudness for AI Music
Bring AI-made songs (Suno, Udio) or your own recordings to a loudness target such as −14 LUFS with a true-peak ceiling. Process an album with one setting, compare at equal loudness, save WAV or MP3. Nothing is uploaded.
Loading the tool…
- 5 out of 5 stars익명 이용자
November 11, 2026
테스트 음원을 올려서 직접 마스터링해봤는데, -6.3 LUFS였던 원본이 목표한 -14.0 LUFS에 정확히 맞춰졌어요. 처리 전후 음량이랑 최대 피크를 숫자로 보여줘서 결과를 확인하기 쉽고, 같은 음량으로 원본과 비교해 들을 수 있는 것도 좋았어요.…
Newest reviews first. Swipe or use the arrow keys to browse.
Audio Mastering — Loudness for AI Music: complete guide
Walk through the steps and examples, or jump straight to the topic you need.
At a glance
- Engine
- The PPUTROLL Master engine (a signal-processing program) runs in the browser's Web Worker. It is not a machine-learning model. The engine file (about 6.8 MB) is downloaded once the first time you process.
- Accepted files
- MP3, WAV, FLAC, M4A and AAC, plus OGG if your browser can decode it. Up to 300 MB per track and 10 minutes at 48 kHz (28.8 million samples), and up to 20 tracks at a time.
- Settings
- Processing style (Gentle, Standard, Strong), target loudness (−24 to −6 LUFS, shortcuts −14, −16 and −9) and peak ceiling (−3 to 0 dBTP, default −1) are applied equally to every track.
- Results
- Shows each track's loudness (LUFS) and true peak (dBTP) before and after, and tells you as it is if the result is more than 0.5 LU off the target.
- Saving
- 24-bit WAV (TPDF dither), 320 kbps MP3, and multiple tracks as a single ZIP. No sign-up and no usage limit.
- Privacy
- Audio is processed only inside this browser and never sent to a server. The internet is used only to download the engine and the MP3 encoder files.
How to use Audio Mastering — Loudness for AI Music

Add one track or a whole album

Pick a processing style, target loudness (LUFS) and peak ceiling, then press Master

Compare with the original at equal loudness and save as WAV, MP3 or ZIP
Add your tracks
Drag and drop files or use Choose files to pick one track or a whole album. Files that are too large or in an unsupported format are filtered out and listed by name.
Set your target
For tracks going to YouTube or Spotify, choose the −14 shortcut; for Apple Music, the −16 shortcut. If this is your first time, leave the processing style on Standard and keep the peak ceiling at −1 dBTP, which leaves room so the track will not distort when converted to MP3 or AAC.
Click Master tracks
Tracks are processed one at a time, and the list shows progress. The first time, the downloaded size is shown while the engine downloads. If you click Stop partway, the remaining tracks stay in the list so you can start again.
Listen at equal loudness, then save
With Compare at equal loudness on, switch between Original and Mastered to listen to the same section. If you like the result, save each track as WAV or MP3, or download everything at once as a ZIP.
What it’s good for
Why match loudness
Spotify states in its official documentation that it plays every track at around −14 LUFS. Tracks much louder than that are turned down during playback, and quieter tracks are raised less if they have no headroom (peak room) left. AI-generated tracks often vary in loudness from song to song, so matching them to the same target before you group them into an album or playlist keeps the volume from jumping up or down when you skip between tracks.
Why you should compare at equal loudness
Human ears tend to prefer whatever sounds even slightly louder. If the mastered result is louder than the original, it can sound better even when nothing has actually improved. With Compare at equal loudness turned on, the louder version is turned down by the measured difference during playback, so you hear the difference in sound rather than in volume. The saved file is not changed.
How it is processed
The PPUTROLL Master engine (a signal-processing program) runs inside this browser. It is not a machine-learning model, and your audio is never sent to a server. The engine file (about 6.8 MB) is downloaded once the first time you process.
Worked examples
How much is turned down in equal-loudness comparison
Before −20.7 LUFS, after −14.7 LUFSThe mastered side plays 6.0 dB lower (gain 0.50)Reading a result that missed the target
Target −9 LUFS, peak ceiling −1 dBTP → result −10.0 LUFS, true peak −1.0 dBTPEnded 1.0 LU below the target · the peak hit the ceiling, so it could not go higherSaved size and maximum length
A 3-minute stereo track at 44.1 kHz24-bit WAV of about 45.4 MB · maximum length at this sample rate is 10 min 53 sChoosing a target loudness
Swipe the table sideways to see the rest.
| Target | For | Good to know |
|---|---|---|
| −14 LUFS | YouTube · Spotify | Spotify states in its official documentation that it plays tracks at −14 LUFS. The YouTube figure is a widely measured value. |
| −16 LUFS | Apple Music · podcasts | Apple does not publish an official figure. −16 is a widely measured and recommended value. |
| −9 LUFS | When you want it loud | On streaming services it may be turned down again during playback. With a −1 dBTP peak ceiling, some tracks may stop around −10. |
When the result isn’t what you expected
It says the browser could not decode the file
The file is damaged or in a format this browser does not support. Safari may not be able to decode OGG. Try another browser, or convert the file to WAV or MP3 and add it again.
It fails with an out-of-memory message
Longer tracks use more memory. If you are on a phone or have many other tabs open, try a desktop browser and split the track into parts shorter than 10 minutes.
The first run takes a long time
The first time, the engine file (about 6.8 MB) is downloaded. The downloaded size is shown, and after that the browser uses the stored file.
My results disappeared after I changed a setting
Results were made with those settings, so changing a setting clears them. Click Master tracks again with the new settings. Your track list stays as it is.
Key terms
- LUFS
- A measure of the loudness a person perceives over a whole track. The closer to 0, the louder (−9 is louder than −14).
- LU
- The unit for the difference between two LUFS values. 1 LU is the same size as 1 dB.
- True peak (dBTP)
- The highest instantaneous value a signal can actually reach between digital samples. Close to 0, it can distort when converted to MP3 or AAC.
- Dither
- Adding a very small amount of noise to spread out the noise created when reducing to 24-bit.
Audio Mastering — Loudness for AI Music FAQ
Is it really free? Is there a usage limit?
It is free, with no sign-up and no limit on the number of downloads. Processing happens in your browser, so there is no server cost. Each track can be up to 10 minutes (at 48 kHz) and 300 MB, and up to 20 tracks are accepted at a time.
I set the target to −9 LUFS but got −10
If the result is off from the target by more than 0.5 LU, the tool shows that on screen as it is. If the true peak after processing has reached the peak ceiling (−1 dBTP by default), going louder would exceed the ceiling, so it stopped there. Moving the peak ceiling closer to 0 can make it louder, but the risk of distortion when it is converted to MP3 or AAC goes up.
Is there a loudness preset for Korean music services like Melon or Genie?
I could not find official published material on the loudness normalization standards of Korean music services, so no shortcut is included. You can enter any target loudness yourself.
Does it have to be an AI-made track?
No. AI music is in the name because many users work with generated tracks from tools like Suno and Udio, but tracks you recorded or mixed yourself are processed the same way.
Can I give each track on an album a different target?
One run uses the same settings for every track. To use different settings per track, add the tracks separately and process them one batch at a time with the settings changed.