Reaction Time Test
Tap the moment the screen turns green to measure reaction time in ms; five rounds give an average and median compared with the public 273 ms median.
Loading the tool…
Used this tool? Share what worked for you — it helps the next person.
Reaction Time Test: complete guide
Walk through the steps and examples, or jump straight to the topic you need.
At a glance
- How it measures
- When the red screen turns green after a random time between 1.5 and 4.5 seconds, press. It measures 5 times.
- Early presses
- If you press before green, or within 0.1 second (100 ms) after the signal, it counts as a guess and that round is redone. If you do not press for over 5 seconds, it is a timeout.
- Result
- Shows the average, median, best record, the record for each round, and the number of early presses.
- Benchmark
- Compared with the overall median of 273 ms in the Human Benchmark reaction time statistics (checked on 2026-09-30).
- Measurement error
- Monitor refresh and mouse or touch input lag (usually a few to tens of ms) are included.
How to use Reaction Time Test
Press the screen to start
Press the area that says Press to start with the mouse, touch, or the Space bar (or Enter).
Wait until it turns green
Do not press while it says Wait... If you leave the tab while waiting, that round stops.
Press right away when you see Now!
When it turns green and shows Now!, press as fast as you can. The ms for that round is shown, and pressing again starts the next round.
Check the results of 5 rounds
When Done! appears, check the average, median, best record, and the comparison with the published record, then use copy result to move them. You can measure again with start over.
What it’s good for
How it measures fairly
The moment the signal appears changes every time within 1.5 to 4.5 seconds, so you cannot memorize the beat and press ahead of it. A person's visual reaction is hard to get faster than 0.1 second, so presses faster than that are not recorded. To judge skill rather than one lucky try, look at the median instead of the average.
Comparing with the average reaction time
The overall median in the reaction time statistics published by Human Benchmark is 273 ms. That figure also includes monitor and mouse lag, so it is a fair comparison for browser measurements under the same conditions. A 60 Hz screen alone takes up to about 17 ms just to update the display.
Worked examples
Five even rounds
250 · 270 · 300 · 260 · 280msAverage 272ms · median 270ms · best 250ms
Almost the same as the published median (273ms).A slightly slower record
310 · 330 · 320 · 340 · 300msMedian 320ms
47ms slower than the published median (273ms).Pressing too fast
Pressed 50ms after the signalToo fast (not recorded)Differences by measuring environment
Swipe the table sideways to see the rest.
| Environment | Effect | Recommendation |
|---|---|---|
| Wired mouse or keyboard | Input lag is small. | When you want an accurate comparison |
| Touch screen | Touch processing lag differs by device. | Compare between the same devices. |
| Wireless mouse, 60 Hz screen, power saving mode | It may come out slower. | Turn off power saving and measure again. |
When the result isn’t what you expected
It keeps saying "Too fast"
A press before it turns green or within 0.1 second is not recorded. Do not anticipate the beat; press after you see the color change.
"Timeout" appears
If you do not press within 5 seconds after the signal, that round is not recorded and is redone.
It stopped when I looked at another tab
If you leave the tab while waiting, you cannot see the signal, so that round stops. Press again to continue.
Key terms
- Reaction time
- The time in ms from the moment you see the signal until you press.
- Median
- The middle value when records are put in order of size, which is less affected by outliers.
- Anticipated press
- A press faster than 100 ms, which can hardly be considered a reaction to seeing the signal.
Reaction Time Test FAQ
It comes out slower on my phone.
A touch screen takes longer to register input, and in power saving mode the screen refresh can slow down. Compare between the same devices.
Are my records saved?
By default they stay only on this screen. After 5 rounds you can check your rank, and if you are within the top 1000, your nickname and 5-round median are saved only when you press Add to ranking. Records outside the top 1000 are not saved, and the screen shows only ranks 1 to 10.
Why compare with the median instead of the average?
Even one unusually slow round changes the average a lot, but the median shakes less. The published statistics were also compared by the median.
Can I measure with the keyboard?
Put focus on the measuring area and press the Space bar or Enter. Keys repeated by holding them down are ignored.